FLOE | Docks | Boat Lifts | Trailers | Parts | Accessories | Wisconsin

FLOE Docks and FLOE Boat Lifts. Minnesota and Wisconsin Buy a FLOE Dock or FLOE Boat Lift at St Croix Dock. Aluminum Docks and Trailers, Best Prices*.
*Docks, Lifts, Parts, and Accessories priced without shipping charges.  You will receive a call to inform you of the shipping cost.

 

Click Here To See Prices.

 

FLOE BOAT LIFTS

Why FLOE Lifts are the fastest to install, easiest to use and best choice:

 Patented Easy-Level™ System – allows you to adjust the height and level your boat lift with a cordless drill.

With the patented Easy-Level™ leveling leg system and a cordless drill, you can effortlessly install and level your boat lift without getting in the water. Simply turn the nut inside the leg to adjust lift up or down. You are not limited to incremental holes. Here are some of the great benefits the FLOE Easy-Level™ System has to offer:

  • Infinite Adjustment
  • No Pins to Align
  • One Person Job
  • Easy Seasonal Adjustment
  • Raises installation wheels off the ground

Easy-Level™ leveling legs come standard on all FLOE vertical Boat Lifts.  No need to purchase add-on leveling systems that add cost and weight to your boat lift.


Easy-Level™ and wheel kits. The ultimate combination.

If you have straight in/straight out access for your lift, you can simply add two pair of wheels.
Lift installation is as easy as 1-2-3:

  1. Raise the Easy-Level™ leveling legs with your cordless drill.
  2. Pull the lift into position with boat or by hand.
  3. Use your cordless drill to lower the Easy-Level™ leveling legs until the lift is level and the wheels are off the bottom.

Revolutionary Screw-Drive Technology – faster, quieter, super smooth and more efficient.

A DEFINITIVE LEAP FORWARD IN BOAT LIFT TECHNOLOGY.

Why a VSD boat lift is superior to all others.

  • It raises and lowers your boat in about one-half the time of most other powered boatlifts! This means you will raise your boat to greater protection more often.
  • The super efficient 24-volt VSD will lift a 3500 lb. boat 177 times on a single battery charge. Compare this to a typical 12-volt hydraulic or DC powered winch lift which will discharge after about 35 lifts.
  • Drive train is whisper quiet with no clicking winch gears or pinging cable.
  • Low maintenance gear head electric motor.
  • Industrial strength ball-screw is rated for 20,000 cycles at 10,000 lbs.
  • Environmentally friendly – no possibility of oil leaks common with hydraulic lifts.
  • No winch cable to ever replace.
Sealed gear head motor simply spins the screw so that the ball nut travels back and forth as it pulls the lifting cable. It is permanently lubricated, making it virtually maintenance free.

FLOE’s custom electronic control system allows for easy power and accessory connection, and gives you the following benefits:

  • Quickly raise and lower your boat with the push of a button
  • Industrial duty wired remote with 25’ cord can be conveniently positioned
  • Wireless remote and flood/canopy light options
  • Can be used in conjunction with solar panel
  • Comes standard with battery tray and box
floe vsd
 
  • Raise and lower your boat lift and light up your dock with a wireless remote control
For electric winch and VSD model boat lifts
  • Easy and convenient way to remotely raise and lower your boat lift
  • Range up to 300 feet
  • Operates boat lift and optional exterior LED flood lighting kit
  • Wireless remote kit includes a receiver with mounting post and two key fob remotes

     

     floe wireless remote

    Great looking, snug fitting, extra deep canopy maximizes boat protection.  High quality fabric with Quick-Clip™ system is quicker and easier to install than all others.

    8 reasons why FLOE boat lift canopy systems offer you more for your money:

    • Greater boat protection. With FLOE’s extra deep fabric and framework, your canopy will not blow in or up and will keep your boat fully covered.
    • Upscale style with tailor-fit fabric for a refined look.
    • Fabric is held taut with FLOE’s exclusive Quick-Clip™ fabric attachment system.
    • FLOE uses premium-grade solution dyed fabric. It has a more luxurious look and weighs 50% less than comparable vinyl fabrics for easy removal and installation.
    • SDP fabric is urethane coated, UV protected and has rip-resistant technology.
    • Many canopy lengths and widths are available to accommodate a variety of watercraft lengths.
    • Canopy frames adjust vertically and horizontally for perfect boat coverage.
    • Full length seams are heat sealed to eliminate leaks.
    CHECK OUT THE NEW MAXISTM CANOPY SYSTEM!

    Easy access into your lift  with the touch of a button

    The MaxisTM, with its extremely deep canopy sides, provides more protection – and with the push of a button, you have easy access for boats with towers and bimini tops. Mesh ends and side accents allow air to flow through the canopy. CLICK HERE FOR AVAILABLE COLORS.

    Canopy Color Choices
    Navy Blue, Green, and Grey (actual colors will vary from the web site).

    Quick-Clip™ and Elastic Tension-Belt™ Systems
    FLOE’s innovative Quick-Clip™ System with ergonomic finger grips allows you to install and remove your canopy fabric in half the time of other systems. The exclusive Elastic Tension-Belt™ design provides constant tension on the fabric for a taut look and stunning aesthetics.

    Canopy Extensions – Canopy extensions make our extra deep canopy even deeper.
    FLOE’s canopy extensions give you extra clearance so you can bring boats with wakeboard towers and pontoons with bimini covers into your boat lift without having to fold anything down.  Canopy extension kits add an additional 18″ of side coverage.  They are available in all of our popular SDP fabric colors.  Canopy extensions require that the lift be anchored.

    Canopy extensions are a great solution for watercraft with:

    • Wakeboard towers
    • Bimini tops
    • Full enclosures
    • Deep hulls such as cruiser

    Canopy extensions use sturdy fully adjustable aluminum frames that bolt to the bottom of the main canopy rails to support the extra fabric.

    Mesh End Options – for high wind applications.

     

     

    GUIDE-INS

    Pro-Park™ Vertical Guide-In System
    For boats 18′ or longer, Pro-Park™ has the ultimate “can’t miss” double entrance guide-in system. It starts to guide your craft 32” prior to the boat entering the lift and again as you enter the lift. They are designed to be used in combination with another pair of single or double guide-ins at the front of the lift. For smaller, easy to handle boats, you may opt for two pair of single Pro-Park™ guide-ins.

    • Guides boat by its rub rail so it never mars or touches the hull
    • Maintenance free PVC guide tubes covered by SDP fabric
    • Aluminum attachment framework with infinite width adjustment
    • Sold in pairs of either single or double guide-ins

    Precision-Park™ Horizontal Guide-In System

    • Full-length carpeted horizontal guides with vertical entry bumpers for initial contact
    • Two additional vertical bumpers for final contact with boats rub rail for perfect alignment
    • Adjusts vertically and horizontally for a perfect fit
    • Available for all V and VSD lifts except the VSD-7500

    Pro Park verticle guide in

     


    • Main frame beam lowers to 9.5″ from the ground allowing a FLOE vertical boat lift to work in less water than other boat lifts.
    • Easiest boat lift installation and removal options.
    • FLOE products are manufactured with the finest corrosion-resistant, custom-aluminum extrusions and stainless steel cables.  FLOE boat lift systems are backed by a 15-year limited warranty.

    FLOE has a complete line of vertical boat lifts and pontoon lifts with extra deep canopies ranging in capacities from 2000 lbs to 10,000 lbs.  FLOE boat lifts work in the greatest range of water depths and offer the most protection for your watercraft.

    MODELS & SPECS

    All FLOE Boat Lifts have durable, corrosion resistant components. Other maintenance free features include:

    • Custom engineered extruded aluminum structures.
    • Stainless steel and aluminum fasteners.
    • Stainless steel leveling cables.
    • Heavy-duty aluminum pulleys with machined stainless steel pins.
    • Bolt together design with modular components eliminates structural welds that can fatigue and crack over time.
    • Lock-nuts keep frame components tight.

    Vertical boat lift models:

    Vertical boat lifts are available with electric 12 V winches or a manual winch.

    • V-2602 – Without question, this is the finest double PWC boat lift on the market. It has more bed travel and incorporates all of our V-Lift technologies. It holds two PWCs at adjustable, staggered heights. Includes two pair of full-length bunks.
    • V-2000 – This boat lift is ideal for small to medium sized fishing boats, runabouts & jet boats.
    • V-3600, V-4600 – These boat lifts will handle a variety of fishing boats, runabouts, ski boats, jet boats & pontoons.

    Vertical Screw Drive (VSD) lifts – Easier, Faster, Smarter!

    Why a VSD lift is superior to all others:

    • It raises and lowers your boat in about one-half the time of most other powered boat lifts!
    • The super efficient 24-volt VSD will lift a 3500 lb. boat 177 times on a single battery charge.
    • Drive train is whisper quiet with no clicking winch gears or pining cables.
    • Low-maintenance gear head electric motor.
    • Industrial strength ball-screw is rated for 20,000 cycles at 10,000 lbs.
    • Environmentally friendly – no possibility of oil leaks common with hydraulic lifts.
    • Cable doesn’t wear like winch lifts.

    All VSD lifts are available in a 120-volt AC or 24-volt DC version.

    • VSD-3800 – This boat lift is ideal for medium sized fishing boats, runabouts, ski boats, jet boats & small to medium sized pontoons.
    • VSD-5000 – This boat lift is ideal for medium to large fishing boats, jet boats, runabouts, ski boats, pontoons, small cruisers & deck boats.
    • VSD-5000 for Pontoons – Wider and longer lift is ideal for today’s larger pontoons.
    • VSD-6000 – This boat lift is for wider pontoon boats with its 131″ interior width.
    • VSD-6500 & VSD-8000 – These boat lifts are ideal for large wakeboard boats & speed boats, medium sport fishers and small to medium cruisers.
    • VSD-10000 – This boat lift offers the strength and size needed for the larger heavier crafts.
    EASY-LEVEL™ LEVELING SYSTEM

    With the patented Easy-Level™ leveling leg system and a cordless drill, you can effortlessly install and level your boat lift without getting in the water. Simply turn the nut inside the leg to adjust lift up or down. You are not limited to incremental holes. Here are some of the great benefits the FLOE Easy-Level™ System has to offer:

    • Infinite Adjustment
    • No Pins to Align
    • One Person Job
    • Easy Seasonal Adjustment
    • Raises installation wheels off the ground

    Easy-Level™ leveling legs come standard on all FLOE vertical Boat Lifts.  No need to purchase add-on leveling systems that add cost and weight to your boat lift.


    Easy-Level™ and wheel kits. The ultimate combination.

    If you have straight in/straight out access for your lift, you can simply add two pair of wheels.
    Lift installation is as easy as 1-2-3:

    1. Raise the Easy-Level™ leveling legs with your cordless drill.
    2. Pull the lift into position with boat or by hand.
    3. Use your cordless drill to lower the Easy-Level™ leveling legs until the lift is level and the wheels are off the bottom.

    PLAY VIDEO


     
    ROLL-IN DOCKS
    Floe Dock Layout Floe Dock Layout Wedge

    6 Reasons why more people buy FLOE modular roll-in aluminum boat docks than any other in the world!

    1. Gorgeous shorefront appeal
    2. Rock solid stability
    3. Easiest to level
    4. Modular design
    5. Easiest to install and remove
    6. For 33 years, FLOE’s quality and innovation have been and continue to be the benchmark for the dock and boat lift industry

    Easy-Level™ Leveling System  Easier, Faster, Smarter!

    • Effortlessly level each dock section independently from the top with a cordless drill or FLOE’s leveling tool.
    • “Topside” aluminum screw-jack system on each wheel kit versus one leveling system at the end of the dock with mid-section support posts
    • If one wheel drops into a hole or sinks into the mud, it can easily be leveled
    • Eliminates having to lift and level the heavy mid-section of a boat dock that uses potentially dangerous and unsightly support posts
    • Screw-jacks also eliminate winches, broken cables and binding pipes found on other docks
    • Topside adjustment hole is neatly finished with a flat plastic cap

    PLAY VIDEO

    FLOE’S SECRET TO MODULAR PORTABILITY… QUICK-CONNECTS™ AND EASY-LEVEL™ WHEEL KITS ON EVERY SECTION.

    Easier, Faster, Smarter!

    • Links modular dock sections together versus hard bolting.
    • Quickly add or disconnect sections.
    • Can be added anywhere to make it easy to create custom dock configurations such as slips.
    • Disconnected dock sections can be moved independently to make installation and removal easy.
      • In the “Locked” position dock sections are held securely in place and close together.
      • In the “Transport” position dock sections have a gap so they can pivot. This allows multiple sections to be pulled in and out of the water with ease.

    PLAY VIDEO

    Double Braced Easy-Level™ Support Legs
    • Roll-in Dock sections are safer because they are more stable with double bracing on each wheel kit.
    • Eliminates the side-to-side sway common with other docks.
    • More rigid and durable than other lake docks that use vertical non-braced pipes especially when transporting over rough terrain.
    • No high maintenance cable or chain to tension.
    • Kits are available to accommodate water depths up to 8 1/2 feet.

    PLAY VIDEO

    Multiple Anti-Sway Wheel Kits

    • Wheel kits on every section versus one at the end of a long dock eliminates stress on long, unsupported mid sections
    • Easier to lift the shore-end of the dock when installing and removing
    • You lift less than half of the weight of one section no matter how long your dock is
    • Add a shore-end wheel kit to eliminate lifting when you roll your dock in and out

    PLAY VIDEO

    Wheel and Sand Pad Choices

    • Standard wheel is drilled and fills with water for ballast. The standard wheel is for use in seasonal and permanent applications. Works best in firm to moderately soft applications where the anticipated settling will be no greater than 6″ into dense mud.
    • Mud wheel is not drilled and adds buoyancy to ease installation and removal. The mud wheel should only be used in dense mud applications where the anticipated settling will be more than 4″.
    • Sand pad is available for installations where portability is not a concern and/or a necessity. Wide-based sand pads provide substantial support and stability. The sand pads pivot to conform to changing bottom contours.

    Dock Structure

    • Bridge-Type Truss
    • Highest strength-to-weight ratio available
    • Open design allows large waves to flow through the dock section rather than pounding against it
    • Webbing is welded on the inside for a sharp clean appearance

    PLAY VIDEO